Tank Specifications

Capacity: 700 gallons
Dimensions: 48" Diameter × 98" Height (4 ft × 8 ft 2 in)
Specific Gravity: 1.9
Color: Translucent White
Tank Type: Vertical
Wall: Single Wall
Installation: Above-ground tank. Do not install below grade.
Lid: 16"
Resin: PVDF
Manufacturer: Bailiff
Weight: 265 lbs

Every Tank Undergoes Hydrostatic Testing Before Release
Kynar® PVDF Resin: Arkema Lists FDA and NSF® Listings for Kynar® PVDF Resin
Pure in Its Natural Form; Meets Specifications for Food and Pharmaceutical Processing
Naturally Resistant to UV and Weathering
Rated for Atmospheric Pressure Only
Lifting/Tie-Down Lugs Molded-In

3D View

Drag to rotate, scroll or pinch to zoom. Shows the standard tank without fittings or options. The model is for reference, and small differences from the finished tank are possible. See the tank drawing for dimensions.

Fittings & Options for Sulfuric Acid

We outfit sulfuric acid tanks to your specifications at our Willis, Texas plant.

Bolted Flanges (no welded sidewall flanges in acid service)
Bulkhead Fittings with Viton® Gaskets
PVDF Fittings for Concentrations Above 75%
Top Fill Lines
Screened U-Vents
Ball Valves
Reverse Float & Ultrasonic Level Indicators
Interstitial Leak Detectors (Double Wall)
Insulation & Heat Tracing
Wind/Seismic Tie-Down Systems
OSHA Ladders

Manufacturer Information

Manufacturer: Bailiff
Part Number: PVDF-VTB00700-48-1.9-NAT
Warranty: Limited 1-Year Warranty for sulfuric acid service

Resin Information

Resin: PVDF
Color: Translucent White
Temperature: PVDF has a maximum continuous use temperature of 275 F for some applications. for some applications.
Chemical Compatibility: Sulfuric Acid Chemical Compatibility

Shipping Information

Ship Width: 0"
Ship Length: 0"
Ship Height: 0"
Ship Weight
Ship Class

Sulfuric acid service

700-Gallon PVDF Tank in Sulfuric Acid Service

PVDF is rated Excellent for sulfuric acid from 1% to 93% in our compatibility database. Here is how this tank fits your acid.

Concentration	PVDF rating
1% – 10%	Excellent
10% – 75%	Excellent
75% – 93%	Excellent
Above 93%	Contact us

Load check

Full of 96–98% sulfuric acid, this tank would hold about 10,500 lb of acid (about 15 lb per gallon). It is rated 1.9 SG, above the roughly 1.84 specific gravity of concentrated acid.

⌂

Containment

This is a single wall tank. To capture leaks and acid fumes without a separate dike, consider a PVDF double wall tank.

⌀

Fittings & gaskets

Up to 75% acid, PVC, CPVC and polypropylene fittings are rated Excellent; above 75%, specify PVDF fittings. Seal bulkheads with Viton® gaskets. No welded flanges in the sidewall for sulfuric acid. See fittings.

❄